...on a parking garage?

The Fairbanks at Cityfront Center in Chicago was built on top of an existing parking garage. In order to support the new football-shaped tower on the center of the garage, a 6-foot deep concrete transfer mat was used to distribute load to the stronger perimeter columns.
Crystal Center

...in crystaline form?

If a tectonic shift sent giant crystals thrusting up through the water’s surface, it might look something like this dramatic arts center prototype by AS+GG. Crystal structures with cantilevers of up to 230 feet are joined at a base beneath the water.
Matrix Gateway Complex

...as a cube?

The Matrix Gateway Complex by AS+GG would be an exception to the rule of monotony in rectilinear buildings. It would provide residents a full 3-D city experience, featuring suspended platforms linking modular housing and community venues.

...like a big "W?"

Walter Towers are Danish architects Bjarke Ingels Group’s latest project in Prague, Czech Republic. Cool design, but will it stand?

Tuesday, August 10, 2010

Inventive Engineering

Posted by Will it stand? at 12:59 PM 0 comments
Is civil engineering on the cutting edge of technology? While almost all civil engineers remain devoutly proud of their chosen profession, some forward looking engineers are challenging the status quo. Are civil engineers followers – mostly implementing the ideas developed by others? Is there a stagnation of ideas in the profession?

Certainly, we are living in a rapidly evolving world that poses new challenges: environmental quality, global warming, worker safety, homeland security. These challenges may appear outside the purview of long-established civil engineering practice. Who then is more qualified to address these challenges? They cannot be met using only the well-known routine solutions; they demand engineering creativity.

Professor Tomasz Arciszewski, of the Volgenau School of Information Technology and Engineering at George Mason University, has attempted to address these challenges by promoting engineering creativity and inventive design.

Unlike a growing number of faculty, Professor Arciszewski has hands-on design experience in the areas of steel space structures (Poland) and general structural engineering (Switzerland). He is also an inventor with three patents (Canada, Poland, USA) and another seeking approval this year. These experiences let him to an interest in engineering creativity, specifically in inventive design leading to the development of novel, feasible and potentially patentable design concepts.

Over the past decade, Professor Arciszewski has organized a system of courses related to engineering creativity, including a Graduate Certificate Program on “Discovery, Design, and Innovation.” He also teaches a course on “Design and Inventive Engineering,” which regularly attracts 12-14 PhD students from all areas of IT, engineering, the Departments of Psychology and Physics. The course covers many aspects of engineering creativity (which he calls “Inventive Engineering”), including the historical and psychological background, design methods and theories, bio-inspiration in design, AI in design, invited talks by inventors, etc. Undergraduate courses have also been offered.

Professor Arciszewski’s program at George Mason University is unique. The School was established about 20 years ago by Professor Andrew Sage, who was a visionary and saw the future as an intersection of IT/computer science and engineering. In other words, he wanted to create interdesciplinary programs leading to knowledge interegration and emergence of new transdisciplinary knowledge (Building a bridge between Computer Science and Engineering).

This multidisciplinary approach to engineering education has inspired participation from industry leaders. Dr. Paul Seguin of the US Army Corps of Engineers (Office of Strategic Planning) frequently participates in the classes and provides real inventive problems for students to solve. At the end of semester students present their results in front of a panel of about 10 “judges,” who are distinguished scholars and practicing civil engineers.

Luckily, you don’t need to enroll at George Mason to learn more about inventive engineering. Professor Arciszewski recently published a book on “Successful Education. How to Educate Creative Engineers.” It provides a philosophical and intellectual foundation for teaching Inventive Engineering. It is available at http://www.successfuleducationllc.us/.

I commend Professor Arciszewski efforts to transform civil engineering education by teaching students how to become creative people – inventors leading the generation of novel solutions that contribute to the fundamental needs of society and advance our civilization.

Wednesday, April 7, 2010

Will it tick?

Posted by Will it stand? at 7:29 PM 1 comments
Can you tell the time on my new watch? There should be many ways of marking the passage of time. Why are we limited to digital numerals and analog spinning hands? Throughout time many devices, including water clocks and sun dials, were developed, but here in the Western world we've coalesced around two standards.

I love my new Nooka watch. It's digital but analog at once. The 12 dots represent the hours and the horizontal bar fills as the minutes accumulate. It is graphic, simple and unreadable upon first glance by most literate people. It does not ascribe outrageous accuracy to the precise time. Unless you are linked to the atomic clock at the US Naval Observatory, your timepiece is probably wrong.

The literature that came with the watch puts the experience this way: "The linear and graphic representation of time with Nooka watches presents a more intuitive way to view time. The visual mass increases as time passes, giving weight to an ephemeral and abstract concept."

To me this new form is analogous to the seeking of new architecture. From classical to modern and beyond, architecture is constantly evolving. Good architects use developments in technology and practice to design better buildings.

In his controversial work "Toward an Architecture," Le Corbusier wrote that architects should seek standardized forms. He provides the example of the evolution of classic column orders and temple plans into a precise template. Cars too, it was argued, achieved a similar standardization. However, the motor vehicle could now be used as an example to disprove the point. Car companies are attempting to re-form the personal vehicle to be more efficient and run on alternative fuels, but they are constrained by the preconceived standard.

Vehicles, buildings and, apparently, watches are all experiencing a reinvention for the 21st century. Designers of all breeds have their work cut out for them. Finding simple examples of innovation fuel inspiration to improve our relationship with our environment.

Would you wear a Nooka watch? Do you ever wear a wristwatch at all? What other forms do you think timepieces will take on in the future (besides the obvious cell phone)? Do you feel that relating the design of watches, cars and buildings is at all appropriate. Please add your comments below.

Reblog this post [with Zemanta]

Tuesday, March 30, 2010

Pecha Kucha! Gezhundeit.

Posted by Will it stand? at 7:48 PM 0 comments
What is Pecha Kucha? First things first, try pronouncing it Pe-Cha-Ku-Cha with emphasis on the "Cha's." The expression is a colloquialism for chit-chat in Japanese, but since 2003 it has come to mean something special to young designers in several cities. Regular events feature architects, artists, and even engineers (in my case) giving fast-paced lively presentations. Each presenter is permitted only 20 slides and 20 seconds per slide. The results are entertaining to say the least.

On the night that I was asked to represent the Chicago AIA Younger Architects Forum, we heard presentations ranging from vacation photos from Jamacia to a career of designing military bunkers. The topics ranged broadly, but the speeches were unanimously entertaining. It's not certain whether the venue (Martyr's, a local bar) helped provide some liquid courage. The packed house was a bit imposing, but the audience was incredibly supportive and laughed at most of my lame jokes.

Please enjoy the video of my presentation... or not. I'm afraid to spoil my memory of the event by seeing what actually transpired.




Reblog this post [with Zemanta]

Monday, March 8, 2010

The quiet war: architecture and digital technologies

Posted by Will it stand? at 3:31 PM 0 comments
Two weeks ago I attended a lecture/discussion led by Tristan D’Estree Sterk and Douglas Pancoast at the Flatiron Arts Building in Chicago. Both presenters are known for their forward-thinking approach to digital technologies in Architecture.

Tristan founded a small design and technology enterprise called the Office for Robotic Architectural Media & the Bureau for Responsive Architecture (ORAMBRA). We met at the School of the Art Institute of Chicago (SAIC), where we collaborated in teaching a studio on materials and structures. Douglas is now the director of the Architecture and Interior Architecture graduate program at SAIC.

Last fall, Douglas and Tristan welcomed the Association for Computer Aided Design in Architecture (ACADIA) to Chicago for their annual conference. The featured presenters delivered a diverse account of how technology is informing architecture. However, despite the enthusiasm brought by the ACADIA event, some architects continued to question the long-term effects of digital technologies on architecture.



With that history in mind, I entered the recent lecture expecting a demonstration of technological superiority and an argument to adopt digital technologies or get left behind. Instead, the discussion was far more nuanced and philosophical. Instead of merely presenting a few “killer-apps,” Tristan and Douglas attempted to articulate a polemic between new digital technologies and classical design theory. The discussion that followed was intellectual, and to be honest, I had to look up some works, like polemic, when I got home.



Polemic: a controversial argument, as one against some opinion, doctrine, etc.

After leaving the discussion I continued to ponder some of the points that were raised. The following are my perceptions on two topics, as inspired by the talk.

During the presentation, Tristan recalled another architects observation that Western (particularly Christian) culture establishes itself in competition with/ or supremacy over the environment. Many other cultures revere nature or worship the sustaining elements. Christianity, from the earliest chapters of Genesis, places mankind above nature. This line of thought is provocative and largely subconscious but not trivial when it comes to reconciling history, sustainability and technology.

For example, many new analytical procedures have been developed to model efficient heat and light distribution in buildings. However, skeptics refer back to old standards for sizing air conditioners and illuminating rooms. They say that any other approach will be uncomfortable and more expensive. As we enter a new age in design that seeks to be more sustainable, architects must overcome skeptics and re-shape the culture to accept greener norms.

Another healthy discussion focused on the adaptability of buildings as machines for living. An attendee pointed out that the Flatiron Arts building (that the lecture was held at) provided an example of how adaptable traditional design is to new uses. The building began as a warehouse, then was utilized for office space and now houses an eclectic group of art studios. Over time, space has been partitioned into rooms of odd shapes and crooked hallways. Yet, the inefficiency in the layout is recognized as a charming feature of the space, ideally suited for its current residents.

Would new ‘super-buildings’ serve such a diversity of purpose over time? A building uniquely suited for one particular client, may not over time maintain its relevance. Could the Bilbao Guggenheim ever be re-purposed for anything other than a museum? Have some architects over-utilized computer modeling to generate complex forms simply for the sake of looking modern?

Before wholly embracing the digital revolution, perhaps it is worthwhile to ponder the reasons for doing so. I enjoyed the opportunity presented by Tristan and Douglas’ to consider the technological revolution occurring in architecture today.

Saturday, February 6, 2010

Achitects & Beyond

Posted by Will it stand? at 11:18 AM 0 comments
Last Thursday I attended the Architects & Beyond lecture sponsored by the Chicago Young Architects Forum. The event was held at HOKs office in the South Loop. It was marketed as an evening of learning and networking. Four presenters spoke from their personal experiences of setting up new businesses. Three had left safe careers as building architects to follow their passions in non-traditional design arenas.
  • The first presenter set the theme: architects and engineers are uniquely suited with skills that help us solve problems AND these skills need not be limited to building design. Her business was to help other entrepreneurs design a business plan to succeed in the market. She emphasized that your compensation when starting out is 50% financial, 50% experience and feedback. http://www.tillcreative.com/
  • Nathan Benjamin from Planet Reuse was up next. He described his businesses niche in linking stockpiles of re-usable building demolition materials with builders and specifiers. PlanetReuse has evolved into a consulting and brokering company focused on providing the insight, experience and materials its clients need. With a well-defined and efficient process, PlanetReuse expertly matches materials with designers, builders and owners to save projects money, serve LEED efforts and sustain the planet. http://planetreuse.com/
  • A third speaker told of her unlikely transition from architecture to the world of fashion. Mohop shoes, so named for the designers last name, are now among the most fashionable green products on the market. It turns out that Rhino can be used equally well to design a futuristic building as a comfortable sole. Just add a block of carefully selected timber and a CNC end-mill and voila! http://www.mohop.com/

The over-riding lesson is that architects AND engineers have the toolset to take on any number of design challenges, beyond buildings.

While many in attendance were a bit surprised to see an engineer at an AIA event, I was repeatedly encouraged to continue coming. They had lots of questions and wanted to know how to encourage more participation by engineers. I promised that I would do my part. So if youre an engineer tired of hearing presentations about the latest in advanced non-linear response of pre-tensioned members, consider attending some AIA YAF events.
Reblog this post [with Zemanta]

Sunday, January 3, 2010

Will an unreinf. conc. dome stand?

Posted by Will it stand? at 7:43 PM 1 comments
Few 1800-year-olds look so good. From within the rotunda of the Pantheon, you could be excused for thinking that the church was constructed just recently. Among all the remaining Roman sites of the Mediterranean, the basilica is probably the most well preserved. Two features contributed greatly to the preservation: its constant use as a place of worship and the incredible concrete enclosure that protects the interior from the elements.

Piazza dei Rotonda

Constructed in 126 A.D., the Pantheon very likely represents the height of Roman structural engineering achievement. In fact, the 142 ft. diameter cupola is still the largest unreinforced concrete dome in the world. That record is in no jeopardy of being broken, as no modern building code would permit such a structure without the use of at least a minimum of steel reinforcing. And yet the Pantheon stands today without any significant reinforcing to alter the original engineers' design intent.

Ancient engineers and architects found a synergy in form that provides a visual experience while enabling the structure to function. Weight was judiciously removed from the roof structure by including a 30 ft. diameter oculus and coffered interior surface. The oculus is simply a large hole in the ceiling that admits the only natural light into the space. Some might also interpret the opening as a spiritual window to the world of the gods. The coffered sides of the dome provide a waffle-shaped pattern that draws attention upward. These two elements give the only outwardly apparent visual clues to the means of structural support.

Several recent investigations have been undertaken to answer the mystery of the structure. The most frequent citation found on online accounts of the Pantheon follows: Mark, R.; Hutchinson, P. (1986), "On the structure of the Pantheon", Art Bulletin 68: 24–34. A nice online summary of those findings is presented by David Moore, P.E. at RomanConcrete.com. Some of the grandstanding is a bit unwarranted, but it is definitely easy to get carries away when describing the achievement of the Roman Engineers.

To start with, the original designers were accustomed to super-sized structures. And for all the delicacy portrayed within the Pantheon interior, the first rule of the construction is to build it big. The strip foundation on which the curved building rests is about 34 ft. wide. The wall which supports the dome is about 20 ft. thick. However, perhaps to reduce weight or provide behind the scenes storage space, 8 large niches were created within the otherwise solid wall. As usual, arches are used to great effect to relieve distribute load to piers, thus permitting the openings. This great mass of wall was necessary to provide adequate resistance to the inevitable outward thrust of the dome. No buttresses or perpendicular supporting structures were employed, as was common in later medieval structures.

The dome itself is nearly 20 ft. thick at its base and tapers to just 5 ft. thick at the oculus. A number of techniques were used to achieve the full span. First, a series of seven concentric rings of decreasing size were constructed one on top of the other, like stacking incrementally smaller metal washers. Other authors have suggested that this form is likely borrowed from the very early structural development of the corbeled arch - where a series of stones are stacked, with each cantilevering slightly past the previous. Using this technique, it's possible that the first stages of the dome were constructed without shoring down to the floor.

Beyond the stepped region, the shell becomes a smooth continuous surface. This part of the dome, in addition to the visible interior coffers, was likely cast on formwork supported from below. At the ring of the oculus, the building materials change again. Here a combination of tile and metal plates provide the compression ring that resolves all of the forces acting at the apex of the dome.
The Roman engineers impressively used the materials and methods available to them for maximum structural efficiency. They even created special light-weight concrete to reduce the overall weight of the dome. The 85 lb/ft3 (PCF) mix used at the top of the dome is approximately 40% lighter than today's normal weight concrete. It's even lighter than most conventionally available lightweight concrete. Despite the selection of lightweight aggregates, the engineers still achieved a compressive strength near 3000 lb/in2 (PSI), very near modern expectations for standard strength concrete. It's also important to point out that the Pozzolan binder used by the Romans differs quite a bit from the Portland Cement we use today (which requires a very high energy industrial process).

Despite their best efforts, cracks have been witnessed in the dome. The papers I reference above go into detail about their possible origins. They tend to equate the problem as one of excessive tensile hoop stresses near the base of the dome. Like a simple arch, domes also convert vertical forces into horizontal pressure. I prefer to think of the cracking in terms of the small displacement probably occurring at the top of the supporting wall. Stone and concrete, we all know is not a flexible material.

The obvious solution to the problem would be to wrap the base of the dome with some form of tension ring, essentially preventing it from spreading further. However, experts again disagree about when the cracks first appeared. It's possible that they formed immediately after construction, and the dome has stood for over 18 centuries since. It's even possible that the ancient designers were aware of this phenomenon but anticipated it and compensated in the early construction phases.

Barring a catastrophic seismic event, raging fire or destructive conflict, the Roman Pantheon seems to be in shape to survive many more centuries. It is a credit to the initial work of the designers to plan such a robust and awe inspiring building that future generations would have such keen interest in maintenance and preservation. The structural elegance of the rotunda will be an inspiration to engineers for many generations to come.
Do you think that the Pantheon should be reinforced to withstand possible seismic events, or should the original design integrity be maintained? Are modern building codes overly prescriptive, effectively stifiling innovation like that used at the Pantheon? Should naturally occurring Pozzolan binders used more often in modern building construction. Add your comments below.
Reblog this post [with Zemanta]
 

Will It Stand? Copyright 2009 Reflection Designed by Ipiet Templates Image by Tadpole's Notez